On-Q/Legrand RS-250 User Manual download pdf

Installation Instructions

Please read all instructions before installing

DESCRIPTION AND OPERATION

The RS-250 Universal Application Wall Switch Vacancy Sensor is designed to

replace a standard light or fan switch. It is ideal for living and dining rooms, family

rooms, bedrooms, bathrooms and any other indoor area in a residential space

where occupancy sensor-based manual ON/OFF controls are desirable.

Like a standard switch, you press the ON/OFF button to turn the light or fan

(controlled load) ON and OFF. Unlike a standard switch, the RS-250 automatically

turns OFF the controlled load after the coverage area has been vacant for a period

of time (Time Delay). If motion is detected within 30 seconds after it automatically

turns OFF, the RS-250 automatically turns the load back ON.

While the sensor is factory preset as a Vacancy Sensor with manual ON operation,

it can be adjusted to work as an Occupancy Sensor that turns the controlled load

ON automatically upon detection of occupancy in the area.

Lighted Switch

To help you locate the RS-250 in a dark room, the amber LED illuminates the

ON/OFF button while the controlled load is OFF. When the controlled load is ON,

the LED is OFF.

Operating Modes

There are two operating modes to select from during set up:

MODE 1 Vacancy sensor (Manual-ON/OFF, Auto-OFF): The user must press

the ON/OFF button to turn the load ON. The RS-250 keeps the load ON until no

motion is detected for the selected time delay period (adjustable from 15 seconds

to 30 minutes). There is a 30 second reset delay. If motion is detected during this

time, the sensor turns the load back on automatically. After the reset delay time

has elapsed, the ON/OFF button must be pressed to turn ON the load.

MODE 2 Occupancy sensor (Auto-ON/OFF with manual control and reset

to auto after 5 minutes of vacancy): The load turns ON and OFF automatically

based on occupancy detection. The RS-250 keeps the load ON until no motion is

detected for the selected time delay period. If the load is turned OFF manually,

automatic-ON is re-enabled when no motion is detected for 5 minutes. This

prevents the load from being turned ON after it was deliberately turned OFF.

RS-250

Universal Application Wall Switch

Vacancy Sensor

with Manual ON/OFF

Lens

Lighted Switch

ON/OFF button

SPECIFICATIONS

Voltage ...............................................................120VAC, 60Hz

Load (Single Pole Circuit)

Incandescent or ﬂ uorescent ............................ 0-600 Watts

Fan motor .................................................................. 1/6 hp

Time Delay Adjustment ....................15 seconds to 30 minutes

Light Level Adjustment .......................................10 fc to 150 fc

Environment ..................................Residential Indoor use only

Operating Temperature ............... 32° to 131°F (0° to 55°C)

Humidity ...................................... 95% RH, non-condensing

Tools Needed

Insulated Screwdriver

Wire Strippers

Santa Clara, CA 95050

Call 888.817.0571 for Technical Support

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsPlease read all instructions before installingDESCRIPTION AND OPERATIONThe RS-250 Universal Application Wall Switch Vacancy S

Page 2 - INSTALLATION & WIRING

INFORMACION SOBRE LA GARANTIA DE PRODUCTOWatt Stopper/Legrand garantiza que sus productos están libres de defectos en sus materiales y ensamble por un

Page 3 - PROGRAMMING

Time DelayThe time delay can be selected by the user during set up. It can be adjusted from 15 seconds up to 30 minutes. For additional information on

Page 4 - TROUBLESHOOTING

4. Wire the sensor. Twist the existing wires together with the wire leads on the RS-250 sensor as indicated below. Cap them securely using the wire

Page 5 - WARRANTY INFORMATION

Adjusting the Light LevelThis feature is factory set at maximum, so that even the brightest light will not prevent the sensor from turning the load ON

Page 6 - Instrucciones de Instalación

WARRANTY INFORMATIONWatt Stopper/Legrand warranties its products to be free of defects in materials and workmanship for a period of ﬁ ve (5) years. Th

Page 7 - ADVERTENICA

Instrucciones de InstalaciónPor favor leer todas las instrucciones antes de realizar la instalaciónDESCRIPCION Y OPERACIONEl Sensor de Desocupación de

Page 8 - 1/2"

MODO 2 Sensor de Ocupación (ENCENDIDO/APAGADO automático con control manual y retorno a ENCENDIDO AUTOMATICO después de 5 minutos de desocupación): l

Page 9 - SOLUCION DE PROBLEMAS

Strip Gage1/2"12.7 mmFig. 3: Pelado apropiado del cable4. Conecte el sensor. Tuerza conjuntamente los cables existentes en la caja de conexione

Page 10

• Un patrón de dos parpadeos consecutivos, repetido 3 veces, indicará Modo 2 (Operación como Sensor de Ocupación), ENCENDIDO/APAGADO automático con c

Comments to this Manuals

No comments

On-Q/Legrand RS-250 User Manual

Browse online or download User Manual for Unknown On-Q/Legrand RS-250. On-Q/Legrand RS-250 User's Manual

Summary of Contents

Comments to this Manuals